Configuring Redundancy - NETGEAR ProSafe WC7520 Reference Manual

Configuring Redundancy

To configure redundancy:
Select Stacking > Redundancy. The Redundancy screen displays.
1.
Figure 78.
Configure the settings as explained in
2.
Table 34.
Setting
Enable Redundancy
Controller Mode
Redundancy ID
Controller IP
Primary IP
Secondary IP
Click Apply to save your settings.
118 | Chapter 10: Managing Stacking and Redundancy
ProSafe 20-AP Wireless Controller WC7520 Reference Manual
Table 34.
Description
Select this check box to enable the redundancy feature and to unmask the
configuration fields that enable you to configure this wireless controller to
become part of a redundancy group.
Specify if the wireless controller functions as a primary or secondary controller
by selecting the Primary or Secondary radio button.
Enter a number (1-255) as the ID for the redundancy group.
Enter the common IP address that is used by both the primary and secondary
controller in this redundancy group.
Enter the IP address for the primary controller.
Enter the IP address for the secondary controller.