NETGEAR ProSafe WC7520 Reference Manual page 103

Configure the settings as explained in
4.
Table 30. Firmware Upgrade Settings
Setting
TFTP, FTP, or Local File
Server Parameters (TFTP and FTP only)
Server IP
File Name
User Name (FTP only)
Password (FTP only)
Boot Information
Active Partition
Boot Partition to upgrade
After upgrade boot from
Schedule
Schedule Update Status
When to Upgrade?
Click Apply to save your settings. If you have selected the Now radio button to upgrade the
5.
firmware immediately, the wireless controller reboots.
102 | Chapter 9: Maintaining the Controller
ProSafe 20-AP Wireless Controller WC7520 Reference Manual
Table 30.
Description
Select one of the following radio buttons to specify from which location the
upgrade must occur. The screen adjusts to display the fields that are required
for each upgrade location.
TFTP. Upgrade from a TFTP server. The Server IP and File Name server
•
parameters fields display.
FTP. Upgrade from an FTP server. All of the server parameters fields
•
display.
Local File. Upgrade from a local file that you have downloaded. The server
•
parameter fields do not display but the Browse field becomes available.
Follow the directions of your browser to select the firmware upgrade file
from your computer.
The IP address of the TFTP or FTP server.
The file name of the firmware.
The user name to access the FTP server.
The password to access the FTP server.
This is an informational field that displays the active partition and the current
firmware version.
Select the radio button for the partition to which the new firmware must be
saved.
Select the radio button for the partition from which the wireless controller must
reboot after the firmware has been upgraded.
This is an informational field that displays when the firmware upgrade will
occur. If no update is scheduled, the field displays None.
Select when the firmware upgrade must occur:
Later. Make selections from the drop-down lists to specify the date and
•
time when the upgrade must occur.
Now. The upgrade occurs immediately after you have clicked Apply.
•