Package Contents; Hardware Features; Front Panel Ports And Leds - NETGEAR ProSafe WC7520 Reference Manual

• RF planning and management
RF planning tool to predict the number and placement of APs based on signal
-
strength and the number of users per building floor. Displays the predicted coverage
Automatic control of AP transmit power and channel allocation to reduce interference
-
Automatic load balancing of clients across APs
-
Rate limiting per SSID
-
• Monitoring and reporting
AP heat maps by wireless band and signal strength for real-time status view of the
-
WLAN
Monitoring of the status of the network, wireless controllers, WLANs, and clients, and
-
network usage statistics
Specific health monitoring of APs
-
Logging and emailing of system events, RF events, load balancing events, rate
-
limiting events, and redundancy failover events
For a list of all features and capabilities of the wireless controller, see the datasheet at
http://www.netgear.com/products/service-providers/access-points-wireless-controllers/wirele
ss-management/WC7520.aspx.

Package Contents

The ProSafe 20-AP Wireless Controller WC7520 product package contains the following
items:
ProSafe 20-AP Wireless Controller WC7520 appliance
•
One AC power cable
•
Rubber feet (4) with adhesive backing
•
One rack-mount kit
•
Straight-through Category 5 Ethernet cable
•
• WC7520 ProSafe Wireless Controller Installation Guide
Resource CD
•
If any of the parts are incorrect, missing, or damaged, contact your NETGEAR dealer. Keep
the carton, including the original packing materials, in case you need to return the product for
repair.

Hardware Features

The front panel ports and LEDs, rear panel components, and bottom label of the wireless
controller are described in this section.
8 | Chapter 1: Introduction and Overview
ProSafe 20-AP Wireless Controller WC7520 Reference Manual