Configuring Advanced Security Profiles For Access Point Groups - NETGEAR ProSafe WC7520 Reference Manual

ProSafe 20-AP Wireless Controller WC7520 Reference Manual
Table 23. Network Authentication and Data Encryption (Continued)
Network
Authentication
Legacy 802.1x
WPA with RADIUS
WPA2 with RADIUS
WPA-PSK
WPA2-PSK
WPA2-PSK
WPA and WPA2
WPA-PSK/WPA2-PSK
Configuring Advanced Security Profiles for Access Point
Groups
Not all networks require access point groups. See
Note:
Managing Access Point Groups
point groups.
The Profile Groups screen lets you edit up to eight security profiles for managed access
points in the selected group. The number of security profiles applied to managed access
point depends on the supported profiles per access point. Separate profiles are applied to
802.11b/bg/ng and 802.11a/na mode radios.
Data Encryption
• Select the WPA2 option only if all
clients support WPA2. If this option
is selected, you must use AES.
• WPA/WPA2 with RADIUS allows
clients to use either WPA (with
TKIP) or WPA2 (with AES). If this
option is selected, you must use
TKIP + AES encryption.
TKIP or TKIP + AES and a WPA
passphrase (network key).
AES and TKIP + AES .
TKIP + AES encryption and enter the
WPA passphrase (network key).
TKIP + AES.
Chapter 8: Configuring Security and Wireless Security Profiles
Description
All require RADIUS configuration.
Standard encryption method for WPA2.
Some clients support AES with WPA, but this
is not supported by this access point.
Clients can use either WPA (with TKIP) or
WPA2 (with AES).
Broadcast packets use TKIP. For unicast
(point-to-point) transmissions, WPA clients
use TKIP, and WPA2 clients use AES.
Chapter 6,
for more information about access
| 85