Rebooting Access Points - NETGEAR ProSafe WC7520 Reference Manual

Rebooting Access Points

Select Maintenance > Reboot/Reset > Access Points. The Reboot Access Points
1.
screen displays.
Figure 25.
As an optional step, enter the IP address, MAC address or name of an access point in the
2.
Search Access Point by IP/MAC/Name field, and click Search.
From the List of Access Points, which you can sort by building, floor, or location, specify the
3.
APs that you want to reboot by selecting the check boxes corresponding to the APs, or
specify that you want to reboot all APs by selecting the check box in the heading of the list.
Click Reboot.
4.
50 | Chapter 4: Access Point Discovery and Management
ProSafe 20-AP Wireless Controller WC7520 Reference Manual