Rebooting Access Points; Managing External Storage - NETGEAR WC7520 - ProSafe 20-AP Wireless Controller Reference Manual

ProSafe 20-AP Wireless Controller WC7520 Reference Manual

Rebooting Access Points

1. Select Maintenance > Reboot/Reset > Access Points. The Reboot Access Points
screen displays.
Figure 63.
2. As an optional step, enter the IP address, MAC address or name of an access point in the
Search Access Point by IP/MAC/Name field, and click Search.
3. From the List of Access Points, which you can sort by building, floor, or location, specify the
access points that you want to reboot by selecting the check boxes corresponding to the
access points, or specify that you want to reboot all access points by selecting the check box
in the heading of the list.
4. Click Reboot.

Managing External Storage

The Extended Storage screen displays information about an optionally attached external
storage device such as a USB memory stick or external hard drive, and lets you mount and
dismount the storage device. You can use an external storage device to store more floor heat
maps and extended statistics history.
Chapter 9: Maintaining the Controller | 107