1152A1 Mid-Span Power Distribution Unit - Avaya G650 Installing

Installing and wiring telephone power supplies

1152A1 Mid-Span Power Distribution Unit

The 1152A1 Mid-Span Power Distribution Unit (PDU) is an Ethernet power supply that provides power
to up to 24 46xx-series IP telephones or wireless LAN (WLAN) access points. This unit is used with a
10/100BaseTx standard Ethernet network over a standard TIA/EIA-568 Category 5, 6 or 6e cabling plant.
The 1152A1 meets the current requirements of the IEEE802.3af standard for resistive detection.
The 1152A1 PDU complies with the Underwriters Laboratories Inc. (UL) standard UL 1950, second
edition.
Complies
Approved
Approved
Approved
Approved
For safety instructions, see
Connecting the cables
Important safety instructions
Please read the following helpful tips. Retain these tips for later use.
When using this switch, the following safety precautions should always be followed to reduce the risk of
fire, electric shock, and injury to persons.
•
Read and understand all instructions.
•
Follow all warnings and instructions marked on this switch.
•
This product can be hazardous if immersed in water. To avoid the possibility of electrical shock,
do not use it near water.
•
The 1152A1 PDU contains components sensitive to electrostatic discharge. Do not touch the
circuit boards unless instructed to do so.
•
This product should be operated only from the type of AC (and optional DC) power source
indicated on the label. If you are not sure of the type of AC power being provided, contact a
qualified service person.
•
Do not allow anything to rest on the power cord. Do not locate this product where the cord will be
abused by persons walking on it.
•
Do not overload wall outlets and extension cords as this can result in the risk of line or electric
shock.
198
UL 1950
CSA C22.2 No.950 Std.
CE Regulatory Compliance
EN 60950
TUV EN 60950
Important safety instructions
on page 200.
on page 198. For installation instructions, see
Installing the Avaya G650 Media Gateway
June 2004