Avaya G650 Installing page 87

5
Route the media gateway GROUND wire to first media gateway and connect to the single-point
ground block and connect block.
6
Repeat connecting each media gateway to the single-point ground block.
7
Connect a 6 AWG (#40) (16 mm
block.
8
Route the ground wire to the AC load center ground and connect.
Figure 37: Typical MCC1 Media Gateway grounding wiring diagram
Figure notes
1 Media Gateway
2 Media Gateway Frame Ground
Terminal Block
3 6 AWG (#40) (16 mm
Ground Conductor
4 Single-Point Ground Block
Installing the Avaya G650 Media Gateway
June 2004
NOTE:
If a media gateway is located remotely (in a separate room or building), route the media
gateway GROUND wire to an approved protective ground.
2
1
2
2
) Supplementary
) ground wire to an unused terminal on the single-point ground
5
6
4
3
widfspg2 KLC 091603
5 6 AWG (#40) (16 4 mm
Approved Ground
6 AC Load Center Single-Point Ground
7 Approved Ground
8 Over 50 ft. (15.2 m)
7
8
2
) Ground Wire to
87