Installing And Administering The Patch Cord/Jumper - Avaya G650 Installing

Installing and administering the patch
cord/jumper
Before starting the patch cord installation, obtain a copy of the Port Assignment Record forms from the
customer or marketing representative. See
The white label identifying the terminal block row associated with circuits 17 to 24 connects to an
identically labeled terminal block row at the satellite closet. See
information outlet,
The satellite symbol must be installed at all connection points between the blue field and the information
outlet. It must also be installed at the information outlet itself.
Figure 72, Example 4-pair labeling to information outlet,
for 4-pair circuits from the equipment room to the information outlets. The labeling scheme for 3-pair
circuits from the MDF to a satellite location.
142
Port Assignment Record Form
on page 143. This is always the case for either 1-point or 2-point administration.
on page 135.
Figure 71, Example 3-pair labeling to
on page 144 shows an example labeling scheme
Installing the Avaya G650 Media Gateway
June 2004