About This Documentation
Overview
This documentation, Installing the Avaya G650 Media Gateway provides procedures for installing a
G650 Media Gateway, backplane, and endpoints. While the focus of this document is on the G650 Media
Gateway, the document also describes installation of other media gateways.
The G650 Media Gateway provides card slots for up to 14 TN-type circuit packs, redundant, hot-
swappable power supplies, and AC or DC power. The backplane can support 14 circuit packs, 2 power
supplies, and provides monitoring of system fans, power supplies, and temperature. Up to five G650
Media Gateways can be mounted in an EIA-310 standard 19-inch (48 cm) rack.
Audience
This documentation is for the following audiences:
•
Trained field installation and maintenance personnel
•
Technical support personnel
•
Authorized Business Partners]
Using this documentation
Use this documentation as a guide to install and administer the G650 Media Gateway. For information
about a particular task, use the index or table of contents to locate the page number where the information
is described.
For an overview of the installation process, see
For initial installation of hardware, see Quick Start for Hardware Installation: Avaya S8500 Media Server
(555-245-701) or Quick Start for Hardware Installation: Avaya S8700 or S8710 Media Server (555-245-
703) a quick reference guide.
Use the remaining sections of the document in the sequence they are presented. If certain components are
not to be installed, skip the procedures for those components. You install and configure the components
of the two media servers using information in the following sections:
You next install the media gateways, using sections in
appropriate for the system you are installing.
Installing the Avaya G650 Media Gateway
June 2004
High level overview of installation process on page
Installing the media gateways on page 23
About This Documentation
Overview
21.
as
13