Three-Pair And Four-Pair Modularity - Avaya G650 Installing

Installing and wiring telephones and trunks
Table 22: Station pinout chart
Jack Name 1
DCP
ANALOG
HANDSET

Three-pair and four-pair modularity

Figure 82, 3-pair and 4-pair modularity,
terminal.
Most terminals connect to an information outlet (modular jack) installed at the work location. Make the
connections from the port circuit pack to the modular jacks, as shown in
modularity, on page 166. Then plug the terminal into the modular jack.
Adjunct power connection locations
Figure 82: 3-pair and 4-pair modularity
Figure notes
1 Port Circuit Pack
2 Media Gateway Connector Pins
(3-Pair Modularity)
3 Main Distribution Frame (MDF) Pins
(3-Pair Modularity)
4 Input to Information Outlet (4-Pair
Modularity)
166
2 of 2
2 3 4
TIP
TIP
-TX +RX
on page 166 is from the port circuit pack to the voice or data
on page 167 shows three methods of connecting adjunct power.
5 6 7
RING
RING
-RX +TX
Figure 82, 3-pair and 4-pair
5 Adjunct Power
6 Output From Information Outlet (4-
Pair Modularity)
7 Voice or Data Terminal Pins
Installing the Avaya G650 Media Gateway
8
June 2004