3
Setting the memory time
This function is used to set the time that documents are saved in the
memory, e.g. which due to engaged lines could not be sent. After the set
time is up, the documents are automatically deleted from the memory. The
default setting is 1 hour.
1
Press [UTILITY].
2
Press the [MAINT.] tab and
[ADMINIST.].
3
Press [INITIAL SETTING] in the
administrator management
display.
4
Press the [MANAGE] tab and
[INCOMPLETE TX HOLD].
5
Enter the time using the arrow
keys and press [ENTER] until the
standard display appears.
3-40
Di250f/Di350f
Data Entry
Rev. /