Set Cut-Off Length - Minolta Di250f User Manual

5

Set cut-off length

This function is used to determine how much of the document which is too
long should be cut off and printed on a second page, if the cut function has
been selected.
1 Press [UTILITY].
2 Press the [MAINT.] and
[ADMINIST.] tabs.
3 Press [RX SETTING].
4 Press the [LONGDOC] and
[CUT OFF LENGTH] tabs.
5 Select the required setting and
continue pressing [ENTER] until
the standard display appears.
5-16 Di250f/Di350f
Reception
Rev. /