Minolta Di250f User Manual page 202

Maintenance and Troubleshooting
Message
"This factor cannot be
selected. The tray is not
suitable for 2-sided
transmissions."
"This function cannot be
selected in cancel mode."
This function cannot be used in
duplex mode."
"This function cannot be
selected in exclusive paper
mode."
"Remove all copies from the
output tray."
"Remove original from the
feeder and insert the original
on the SADF."
"The application cannot be
changed. Select cancel
function and change
application."
"Insert number of originals on
the ADF again."
"The job cannot be cancelled :
insufficient memory. The
remaining jobs are started by
pressing the copy key."
"The job cannot be cancelled :
insufficient memory. "
"Original format cannot be
detected. Change paper
format."
Original format is not
recognised. Select
reprofactor."
"Original format cannot be
detected. Select original
format."
"Orig.format is not recognised.
Insert orig. again or disable
one of the functions."
Rev. /
Problem
Wrong paper tray selected
for 2-sided copying.
The operating function
cannot be cancelled.
Wrong paper tray selected
for 2-sided copying.
Paper tray with card or OHP
transparencies for 2-sided
copying selected.
Press fax and copy key at
the same time.
Paper jam
The autoformat function
cannot identify the original
copy.
The autoformat function
cannot identify the original
copy.
Di250f/Di350f
8
Solution
Select a different tray.
Press the cancel key
again.
Select a different tray.
Select a different tray.
Remove the copies.
Insert the original copy in
the single sheet feed.
Press the cancel key and
select the required
function.
Insert the indicated
document again.
Press Start.
Wait until enough memory
space becomes available
again.
Select another paper
format.
Select another reprofactor.
Select another paper
format.
Insert the document again.
Select the document
format again.
Cancel copying.
Insert the document again.
Select the document
format again.
Cancel the indicated
functions.
8-21