Document Identification - Minolta Di250f User Manual

Reception

Document identification

This function is used to select whether the machine should take paper
from any tray, depending on the size of the document (standard paper) or
only paper which matches the size of the document (standard tray).
1 Press [UTILITY].
2 Press the [MAINT.] and
[ADMINIST.] tabs.
3 Press [RX SETTING].
4 Press [PAPER] and
[IF NO PAPER MATCHING UP
TO TX DOC. SIZE?].
Select the required setting and
5
continue pressing [ENTER] until
the standard display appears.
Rev. / Di250f/Di350f
5
5-9