Specifying The Smtp Settings - Konica Minolta BIZHUB 350 User Manual

Specifying settings using PageScope Web Connection

Specifying the SMTP settings

1
In the Administrator mode, click the Network tab.
– For the procedure to log on to Administrator mode, refer to "Log-
ging on to Administrator mode" on page 8-9.
2
Click [E-Mail/Internet FAX], then [SMTP].
3
Specify a setting for each parameter, and then click [Apply].
4
Click [OK].
5
If the setting of a parameter marked with [*] is changed, turn this ma-
chine off, then on again.
Reminder
When turning the machine off, then on again, wait about 10 seconds after
turning the machine off before turning the machine on again. The settings
may not be applied correctly if the machine is turned on immediately after
it is turned off.
200/250/350
8
8-75