Specifying Settings To Limit The Use Of Communication Modes-2 (Mode 476) - Konica Minolta BIZHUB 350 User Manual

9
Bit
1
0
Specifying settings to limit the use of communication modes-2 (mode
476)
Specify whether to permit or prohibit the use of individual communication
modes. Prohibited communication modes do not appear in their selection
screens.
Note
Programmed one-touch dial buttons can be used for transmission even
if a prohibited communication mode has been specified.
If all communication modes are prohibited (modes 475 to 477), some
screens, such as those for specifying transmission settings, may not nor-
mally be displayed.
Factory settings
Bits
Setting
Specifying settings
The shaded cells represent the factory settings. The page numbers on the
right refer to the descriptions of the corresponding functions.
Bit
7
6
5
9-52
Description Setting
Specifies whether or 0
not the use of SNMP
1
is prohibited.
----------------------- 0
7 6 5 4 3 2 1 0
0 0 0 0 0 0 0 0 (HEX: 00)
Description Setting
Specifies whether or 0
not the use of the
1
Scan to SMB opera-
tion is prohibited.
Specifies whether or 0
not the use of SMB
1
printing is prohibit-
ed.
Specifies whether or 0
not the use of G3
1
faxing is prohibited.
Specifying management settings
Description
Permitted
Prohibited
*Do not change this bit.
Description
Permitted
Prohibited
Permitted
Prohibited
Permitted
Prohibited
Page Refer-
ence
----------
----------
Page Refer-
ence
----------
----------
----------
200/250/350