Specifying Chain Dialing - Konica Minolta BIZHUB 350 User Manual

Scan to E-Mail
7
Specify the necessary Menu settings.
– If the optional fax kit has been installed, specify the FAX Menu set-
tings.
– For details, refer to "Specifying additional functions" on page 3-21.
SCANReady
One-Touch Search
Setting 1
TSI only
TSI
2in1
Job List
8
Press the [Start] key.

Specifying chain dialing

If the destination address is longer than 64 characters, the address can be
specified by combining addresses registered to one-touch dial buttons and
an entered address.
Touch [Chain], and then select one-touch dial buttons or enter an address.
!
Detail
Chain dialing can only be used with one destination per transmission.
With chain dialing, the address can contain up to 192 digits (64 charac-
ters from a one-touch dial button + 64 characters from a one-touch dial
button + 64 characters from an entered address).
The one-touch dial buttons to be used with chain dialing must be pro-
grammed in advance.
SCANReady
One-Touch Search
Address
Detail
@ Q
PC(Email)
Change
Comm.Mode
Job List
200/250/350
Fine
Quality&
Direct
Input Reduction
Setting 2
2-Sided TX
Fine
Quality&
Direct
Reduction
Input
Delete
W E R T Y
A S D F G H
Z X C V B
Alpha Caps
Chain
Menu
Network
TX Report
Rotation TX
Memory
100%
Free
Chain
Menu
Domain
U I O P
J K L
N M .
TIFF-MH
Scan Mode
Memory
100%
Free
3
3-11