Available Parameters; Administrator Management 1; Administrator Management 2 - Konica Minolta BIZHUB 350 User Manual

Specifying management settings
9 Specifying management settings
9.1

Available parameters

The following Administrator Management parameters are related to the infor-
mation in this manual.

Administrator Management 1

Item
Initial Setting
TX Settings
RX Settings
Report Settings
Document
Management

Administrator Management 2

Item
Network Settings
Software SW
Ping
SSL/TLS
200/250/350
TSI
Registration
TX Document
RX Document Port
All Other
Documents
Description
Specifies the required settings for using this machine over a net-
work. For details, refer to Chapter 2, "Setup" on page 2-3.
Specifies function status settings.
Checks whether this machine is connected to a network. For
details, refer to Chapter 2, "Setup" on page 2-3.
When SSL/TLS is enabled, the communication between the ma-
chine and the client computer can be encrypted. Specifies the
creation, deletion, or encryption of certificates.
Description
Prints the entered text such as the name, fax
number, and address at the top of the output
page when sending an Internet fax.
Registers this transmission source name.
Specifies the default settings for transmission.
Specifies the time and day of the week to print
when receiving an Internet fax.
Specifies the output conditions of the result
reports and communication control reports.
When sending documents from this machine,
they can simultaneously be forwarded to the
addresses specified by the administrator.
Specifies the forwarding addresses.
Specifies the processing and forwarding of
documents received over a network.
Specifies the processing and forwarding of
documents received in other ways than over a
network.
9
9-3