Tx Settings (Administrator Mode) - Konica Minolta BIZHUB 350 User Manual

8
8.8

TX Settings (Administrator mode)

Default transmission settings can be specified.
Settings can be specified for the following.
Item
Quality/Mode
Default Quality
Default Density
Com. Mode
FAX Menu
TSI
Rotation TX
2-Sided TX
Original Bind
Direction
8-44
Specifying settings using PageScope Web Connection
Description
Select the default quality setting that is specified after an operation is
complete.
Select the default density setting that is specified after an operation is
complete.
Select the default communication mode that is specified after an operation is
complete. Select "TX: PC (E-mail)" or "TX: Internet FAX".
Select how the transmission source name is attached and the type of
transmission source information from 1 through 8.
Off: Select this setting to not attach the transmission source name.
Inside Body Text: Select this setting to print the transmission source name on
the original document.
Outside Body Text: Select this setting to not print the transmission source
name on the original document.
Specify whether to reset the rotation transmission after the operation is
complete.
Specify whether to reset the double-sided transmission after the operation is
complete.
If "2-Sided TX" was set to "On", select from "Left Binding", "Top Binding" or
"Auto" for the binding position of the document.
200/250/350