Specifying Pop3 Reception Timeout Settings (Mode 358) - Konica Minolta BIZHUB 350 User Manual

9

Specifying POP3 reception timeout settings (mode 358)

You can specify the time until a timeout of the SMTP server connection oc-
curs when receiving e-mail messages.
Factory settings
Bit
Setting
Specifying settings
The shaded cells represent the factory settings. The page numbers on the
right refer to the descriptions of the corresponding functions.
Bit
7, 6, 5, 4
3, 2, 1, 0
(*)
After changing the settings, the machine must be turned off, then on again.
Reminder
When turning the machine off, then on again, wait about 10 seconds after
turning the machine off before turning the machine on again. The settings
may not be applied correctly if the machine is turned on immediately after
it is turned off.
9-42
7 6 5 4 3 2 1 0
0 0 1 0 0 0 0 0 (HEX: 20)
Description
Specifies the time until a
timeout of the SMTP server
connection occurs when
sending e-mail messages.(*)
-----------------------------
Specifying management settings
Setting Description
0001 30 seconds
0010 60 seconds
0011 90 seconds
0100 120 seconds
0101 150 seconds
0110 180 seconds
0111 210 seconds
1000 240 seconds
1001 270 seconds
1010 300 seconds
Other * Do not specify other set-
tings than the above.
*
0000 Do not change these bits.
Page
refer-
ence
---------
---------
200/250/350