Setup
2.11
LDAP Setting
The settings used by the LDAP (Lightweight Directory Access Protocol) serv-
er in a network can be specified.
Settings can be specified for the following.
Item
LDAP Search
LDAP Server Setting
Search Default Setting
LDAP Search
1
In the Network Setting screen, touch [LDAP Setting].
2
Touch [LDAP Search].
Utility/Counter
LDAP Setting
LDAP Search
LDAP Server Setting
3
Select whether to allow LDAP searches.
200/250/350
Description
Select whether to enable or disable the address search used by
an LDAP server. When "Yes" is selected, an LDAP server can be
specified.
Register the LDAP server to be accessed. Up to 5 LDAP servers
can be registered in this machine.
When multiple LDAP servers are registered, select the primary
LDAP server for performing searches.
Enter
No
Memory
100%
Free
2
2-45