If Transmission Could Not Be Completed; Viewing A Transmission Report - Konica Minolta BIZHUB 350 User Manual

Scan to SMB
5.4

If transmission could not be completed

If the transmission could not be completed correctly, a transmission report
is printed.
!
Detail
You can change the transmission report printing conditions. For details,
refer to "Specifying the transmission report printing conditions (Report
Settings)" on page 9-19.

Viewing a transmission report

No. Item
1 Report output date and time
2 Transmission source infor-
mation (TSI)
3 Transmission information
4 Transmission result
5 Transmission image
200/250/350
The following document has not been transmitted. Try to retransmit.
User/Account :SALES
DESTINATION :NEW YORK
ADDRESS :192.168.1.111
PAGES :1page
RESULT :ED09C6
4
2
(TUE) APR 19 2006 10:31
CHICAGO
DOCUMENT#
TIME STORED :APR 1910:24
TX START
DURATION
MODE
IMAGE
Description
Shows the date and time that the report was printed.
Shows the registered transmission source name.
Shows the document number, the duration of the
transmission, and the transmission mode.
Shows the transmission result. Any of the following
may appear.
OK: The transmission was completed successfully.
INTERR: The transmission was interrupted.
F. MEM: The memory capacity was exceeded.
NG: The transmission failed.
PT. DEL: The transmission to some destinations failed.
Error code: For details, refer to "Network error list" on
page 11-4.
Shows a part of the sent image.
P.1
1
:6614316-761
:APR 1910:30
:6 sec
:SMB
3
5
5-27
5