Turning On And Off, And Resetting The Copier; Turning On And Off; When The Copier Is Turned On - Minolta EP6000 Operator's Manual

5. Turning ON and OFF, and Resetting the Copier

Turning ON and OFF

When Copier is Turned ON
When the Power Switch is turned ON, the message "Welcome!" appears on the Touch Panel and the
Start Key lights up orange.
W e l c o m e
In about 5 seconds, the message changes to "Copy job will start after the copier has warmed up." and
the copier now enables its auto copy start function.
Auto Copy Start Function
Pressing the Start Key at this point does not start a copy cycle. You're going to have to wait for
about 2 minutes and 30 seconds (at an ambient temperature of 23°C).
Auxiliary Finishing
Ready to copy.
Auto Expo. x1.000
Exposure Zoom
1075O099DA
1134P167AB
1134P167AB
➭
p. 23
Orig. Copy
Basics
1
Auto Paper
Paper
1075O270CA
1075O270CA
•
Turning Copier ON
Press the Power Switch to the I (ON) position.
•
Turning Copier OFF
Press the Power Switch to the
position.
Orange Light
Green Light
21
(OFF)
1138O531AA
1138O531AA