The Lan Screen - ZyXEL Communications WAH7608 User Manual

Figure 37 LAN and WAN IP Addresses
The LAN parameters of the WAH7608 are preset in the factory with the following values:
• IP address of 192.168.1.1 with subnet mask of 255.255.255.0 (24 bits)
• DHCP server enabled with 40 client IP addresses starting from 192.168.1.20 to 192.168.1.60.
These parameters should work for the majority of installations. If your ISP gives you explicit DNS server
address(es), read the embedded Web Configurator help regarding what fields need to be configured.

9.2 The LAN Screen

Use this screen to change the IP address for your WAH7608. Click Configuration > Network > LAN. The
screen appears as shown next.
Figure 38 Configuration > Network > LAN
The following table describes the labels in this screen.
Table 18 Configuration > Network > LAN
LABEL
IP Address
IP Subnet Mask
Apply
Chapter 9 LAN
DESCRIPTION
Type the IP address of your WAH7608 in dotted decimal notation.
The subnet mask specifies the network number portion of an IP address. Your
WAH7608 will automatically calculate the subnet mask based on the IP address that
you assign. Unless you are implementing subnetting, use the subnet mask computed
by the WAH7608.
Click Apply to save your changes back to the WAH7608.
WAH7608 User's Guide
73