Bridge Mode Status; Chapter 7 Bridge Mode Status; Overview; What You Can Do - ZyXEL Communications NBG7815 User Manual

7.1 Overview

Many screens that are available in Standard Mode are not available in Bridge Mode, such as port
forwarding and firewall. See

7.2 What You Can Do

• Set up a network with the NBG7815 as a bridge
• Use the Status screen to view read-only information about your NBG7815

7.3 Setting your NBG7815 to Bridge Mode

Log into the Web Configurator if you have not already. See the Quick start Guide for instructions on how
1
to do this.
To use your NBG7815 as a bridge, go to Settings > System > Operating Mode and select Bridge Mode.
2
Figure 19 Changing to Bridge Mode
Note: You have to log in to the Web Configurator again when you change modes. As soon as
you do, your NBG7815 is already in bridge mode.

Chapter 7 Bridge Mode Status

Bridge Mode Status

Section 5.3 on page 50
(Section 7.3 on page
NBG7815 User's Guide
58
C
H A P T E R
for more information.
58).
(Section 7.4 on page
7
59).