Using the EM 9046
"Network" – Configuring the network
Name
IPv4 address
169.254.92.238
Slot analog:
EM 9046
IPv4 address:
auto
subnet mask:
auto
gateway:
auto
LAN UP:
00:1b:66:fe:c4:42
LAN DOWN:
aa:1b:66:fe:c4:43
Via the "Network" menu item, you can assign the receiver a network name
and select whether to obtain an IP address automatically or to enter the IP
address manually. In addition, this menu item displays the unchangeable
MAC addresses of the network interfaces of your receiver.
"Brightness" – Adjusting the brightness
Via the "Brightness" menu item, you can adjust the brightness in 8 steps.
This also adjusts the brightness of the LED lighting.
Extended menu
"Service
To get into the extended menu
In "sys" operating mode, turn the jog dial until
Press the jog dial.
The extended menu
"Service
To change from the extended menu back to the main menu:
Turn the jog dial until
"System
Press the jog dial.
You are back to the main menu
mode.
EM 9046
192.254.95.238
255.255.0.0
0.0.0.0
brightness
setup"
"Service
setup":
"Service
setup" appears.
setup" appears.
"System
setup" of the "sys" operating
Digital 9000
network
setup" appears.
| 57