Extended Menu "Service Setup; Service Setup - Sennheiser Digital 9000 Instruction Manual

Using the EM 9046
Via the "Brightness" menu item, you can adjust the brightness in 8 steps.
This also adjusts the brightness of the LED lighting.
Extended menu "Service
To get into the extended menu
In "sys" operating mode, turn the jog dial until
Press the jog dial.
The extended menu "Service
To change from the extended menu back to the main menu:
Turn the jog dial until "System
Press the jog dial.
You are back to the main menu
mode.
In the extended menu, you can adjust the following settings:
"Factory reset" – Resetting the receiver to the factory defaults
Factory reset
Via the "factory reset" menu item, you can reset your receiver to the fac-
tory default settings. To do so, follow the prompt on the main screen to
F
press the button for 5 seconds.
The following menu items are reset to their factory default settings:
Menu Menu item
Main menu Output level
"System
Word clock
setup"
Network |
name of the network
Network |
IP settings
Brightness
Extended Date & time |
menu selected time zone
"Service
setup"
setup"
"Service setup":
"Service setup" appears.
setup" appears.
setup" appears.
"System setup" of the "sys" operating
factory reset
Factory default setting
0 dB
96 kHz
EM9046_1
Auto
Medium level
Amsterdam, Berlin, Bern,
Rome, Stockholm, Vienna
Digital 9000
Page
63
64
66
66
66
68
| 67