Table of Contents
Advertisement
Using the SKM 9000
76 |
Digital 9000
Using the SKM 9000
Before
using your radio microphone, ask the relevant wireless regu-
latory authority for the exact frequency allocations and apply for an
individual license if necessary.
The supplied supplement "Framework requirements and restrictions
on frequency usage in Europe" provides an overview of the different
European framework requirements and restrictions on frequency
usage. If there is no entry in the supplement, ask the relevant wire-
less regulatory authority for the current rules governing frequency
usage.
Switching the SKM 9000 on/off
When the SKM 9000 is switched on for the first time, it contains the
first frequency preset of the transmitter frequency range (e.g. A1.1:
470.200 MHz). Via the "ch" menu of the EM 9046 receiver, set the
desired frequency preset and adjust the settings of other menu
items and then synchronize the transmitter and the receiver (see
page 66). In doing so, all frequency presets of the transmitter fre-
quency range will be transfered to the SKM 9000.
We recommend you to always adjust the transmitter settings via
the EM 9046 receiver and then to synchronize the transmitter and
the receiver.
To switch the SKM 9000 on:
Keep the
ON/OFF
appears on the display panel 5.
The
ON/OFF
button
B
(here: "Frequency", see page 80) appears on the display panel 5. The
radio microphone transmits an RF signal and the transmission mode
display "HD"/"LR" lights up constantly:
480.000
3:59
To switch the SKM 9000 off:
Keep the
ON/OFF
Remove the accupack/battery pack when the radio microphone will not
be used for extended periods of time (see page 35).
The radio microphone can only be switched off when the lock mode
is deactivated (see page 77).
Switching on the SKM 9000 on and checking the set frequency
before the RF signal is activated
Switch on the SKM 9000 by keeping the
until the "Name" standard display appears.
The RF signal is not activated and the transmission mode display "HD"/
"LR" flashes.
If you call up the "Tune" or "Preset" menu item within the next 10 seconds,
the RF signal remains deactivated until you exit the menu item. If you do
not call up one of the mentioned menu items, the RF signal is automatically
activated after 10 seconds.
B
button
pressed until the Sennheiser logo
B
is backlit in blue and the standard display
B
button
pressed until the display panel goes off.
ON/OFF
B
button
pressed
Hide quick links:
Advertisement
Table of Contents
