Main Menu "Channel Setup; Setup - Sennheiser SKM 9000 Instruction Manual

Using the EM 9046
Main menu "Channel
To get into the main menu:
Select the "ch" operating mode.
Select one or several channels (see page 46).
Call up the menu items described in the following and adjust your
settings.
If no channel is selected,
menu selection.
Press the button to store your settings.
Synchronize your settings via infra-red (see page 66).
"Frequency" – Selecting a frequency preset or setting a frequency
manually
Preset A1.1 Freq 470 . 200 MHz
Range: 470 - 494 MHz
Via the "Frequency" menu item, you can select a frequency preset for the
active booster frequency range or set the frequency manually. In the
above diagram, range "A1" is active. The frequency range is from
"470-494 MHz". For information on how to activate a booster frequency
range, refer to page 52.
Either select a frequency preset ("A1.1" ... "A1.40" in the above dia-
gram) or set the frequency manually ("U"). If you set the frequency
manually, make sure to set a frequency within the current 24 MHz
booster frequency range and maintain a frequency spacing of 600 kHz
to avoid intermodulation interference.
If you manually set the frequency to a value outside the current 24 MHz
booster frequency range and confirm you setting by pressing the
button F, the following error message appears:
Frequency out of booster range

setup"

"Please select Channel" is displayed in the
frequency
Digital 9000 | 67