Table of Contents
Advertisement
Using the EM 9046
"Display" – Selecting the standard display for the transmitters
frequency
display
The "Display" menu item allows you to activate one out of 3 standard dis-
plays: "Name", "Preset" or "Frequency". The "Name" standard display is
factory preset.
"Lock" – Activating/deactivating the lock mode
off
lock
Via the "Lock" menu item, you can activate or deactivate the lock mode for
your transmitters.
"AF source" – Displaying the audio source
SK 9000 line
af source
The
"AF
source" menu item allows you to display the type of microphone
head being used (SKM), the type of audio source being used (SK: "micro",
"line") and the emulation of instrument cables (SK: "type1", "type2",
"type3"). This information is transmitted along with the SKM/SK 9000's
RF signal to the receiver.
The information is displayed until the transmitter is switched off or the
carrier frequency is changed. When the SKM/SK transmits again on the
carrier frequency, the corresponding microphone head/audio source is dis-
played once again in the menu item.
If a transmitter is switched off or transmits on a different carrier fre-
quency,
"No TX
detected" is displayed.
"Cable" – Emulating different instrument cable lengths
type1
cable
Via the "Cable" menu item, you can emulate the lengths of instrument
cables in 3 steps: "type1", "type2" and "type3". If you select "line", no
emulation takes place. The input gain in the "Gain" menu item is set to the
fixed value of –6 dB.
Digital 9000
| 73
Hide quick links:
Advertisement
Table of Contents
