Sennheiser SKM 9000 Instruction Manual page 70

Using the EM 9046
The following settings are possible:
Setting Effect
"on" The transmitter's audio signal is output via both its audio
channel (XLR-3 sockets
channel of the sub-D socket D.
Pressing the COMMAND button on the SKM 9000 COM or
KA 9000 COM has no effect.
"add" The transmitter's audio signal is output via its audio channel
(XLR-3 sockets
Pressing the COMMAND button on the SKM 9000 COM or
KA 9000 COM has the effect that the audio signal is addi-
tionally output via the corresponding channel of the sub-D
socket D.
"mute" The transmitter's audio signal is output via both its audio
channel (XLR-3 sockets
channel of the sub-D socket D.
Pressing the COMMAND button on the SKM 9000 COM
or KA 9000 COM mutes both the audio channel (XLR-3
C
sockets 1 ... 8) and the corresponding channel of the
sub-D socket D.
"toggle" The transmitter's audio signal is output via either its audio
channel (XLR-3 socket
nel of the sub-D socket D.
Pressing the COMMAND button on the SKM 9000 COM or
KA 9000 COM switches between the two channels.
"CH standby" – Muting channels
Ch standby
The "CH standby" menu item allows you to mute selected channels. When
muted, the channels do not output any audio signal, neither via the Analog
Audio Out (AAO)/Digital Audio Out (DAO) modules, nor via headphones.
C
1 ... 8) and the corresponding
C
1 ... 8).
C
1 ... 8) and the corresponding
C
1 ... 8) or the corresponding chan-
ch standby
Digital 9000 | 69