Sennheiser SKM 9000 Instruction Manual page 87

Using the SK 9000
86 | Digital 9000
"Name" – Entering a name
Via the "Name" menu item, you can enter a freely selectable name for the
bodypack transmitter. The name can consist of up to 6 characters from the
following character set:
`+` `,` `-` `|` `/` `0` `1` `2` `3` `4` `5` `6` `7` `8` `9` `*` `;` `<` `=` `>`
`space` `#` `A` `B` `C` `D` `E` `F` `G` `H` `I` `J` `K` `L` `M` `N` `O` `P`
`Q` `R` `S` `T` `U` `V` `W` `X` `Y` `Z`
"Gain" – Adjusting the input gain
Via the "Gain" menu item, you can adjust the input gain in 3 dB steps from
-6 to +42 dB.
When you are using Sennheiser microphones or the Sennheiser
CI 1-4 line/instrument cable, the bodypack transmitter automati-
cally detects the type of input signal present and changes the
adjustment range of the "Gain" menu item accordingly.
Cable type
Sennheiser microphone cable
Sennheiser CI 1-4 line/
instrument cable
"Low cut" – Setting the low-cut filter
Via the "Low cut" menu item, you can set the low-cut filter. The bodypack
transmitter automatically detects the type of input signal present and
changes the settings of the
using the Sennheiser CI 1-4 line/instrument cable, the
item is hidden.
Cable type
Sennheiser microphone cable
Sennheiser CI 1-4 line/
instrument cable
"Cable" – Emulating different instrument cable lengths
Via the "Cable" menu item, you can emulate the lengths of instrument
cables in 3 steps. If you are using the Sennheiser CI 1-4 line/Instrument
cable, the "Cable" menu item is shown.
"RF mode" - Adjusting the transmission mode
The "RF mode" menu item allows you to adjust the transmission mode.
Settings: "HD", "LR".
"Display" – Selecting a standard display
The "Display" menu item allows you to select one out of 3 standard
displays.
480.000
3:59
3:59
"Frequency" "Preset"
Adjustment range
"0 dB" to "+42 dB"
"6 dB" to "+ 9 dB"
"Low cut" menu item accordingly. If you are
Settings
"60 Hz", "80 Hz", "100
"30 Hz", the "Low cut" menu item is
hidden
U
480.000MHz
3:59
"Name"
"Low cut" menu
Hz", "120 Hz"
GUITAR