Using the SK 9000
Overview of the menu items
Icon
Name
Tune
Preset
Name
Gain
a
Low cut
b
Cable
RF mode
Display
Lock
Test tone
Reset
Information
a. If you are using the Sennheiser CI 1-4 line/instrument cable, this menu item is
hidden
b.
If you are using the Sennheiser CI 1-4 line/instrument cable, this menu item is
shown
"Tune"– Setting a frequency
Via the "Tune" menu item, you can set a frequency. The frequencies are
tuneable in 25 kHz steps. If you store your setting, the set frequency is
automatically assigned to the user-defined frequency preset "U". The
bodypack transmitter then changes from the currently set frequency pre-
set to the frequency preset "U" and transmits on the set frequency.
"Preset" – Selecting a frequency preset
Via the "Preset" menu item, you can select a frequency preset from the
active booster frequency range or the frequency preset "U" (see also the
"Tune" menu item).
To activate a different booster frequency range:
Proceed as described from page 50 onwards. You first activate
the booster frequency range on the EM 9046. If you then syn-
chronize the transmitter and the receiver, the booster frequency
range on the transmitter will also be activated.
Function
Sets a frequency
Selects a frequency preset
Enters a name
Adjusts the input gain
Sets the low-cut filter
Emulates different instrument
cable lengths
Adjusts the transmission mode
Selects a standard display
Activates/deactivates the lock
mode
Activates the test tone for level
matching the system and for
the walk test
Resets the factory default
settings
Displays the firmware version
and frequency range
Digital 9000
Page
85
85
86
86
86
86
86
86
87
87
87
87
| 85