Sennheiser SKM 9000 Instruction Manual page 81

Using the SKM 9000
80 | Digital 9000
"Name" – Entering a name
Via the "Name" menu item, you can enter a freely selectable name for the
radio microphone. The name can consist of up to 6 characters from the fol-
lowing character set:
`+` `,` `-` `|` `/` `0` `1` `2` `3` `4` `5` `6` `7` `8` `9` `*` `;` `<` `=` `>`
`space` `#` `A` `B` `C` `D` `E` `F` `G` `H` `I` `J` `K` `L` `M` `N` `O` `P`
`Q` `R` `S` `T` `U` `V` `W` `X` `Y` `Z`
"Gain" – Adjusting the input gain
Via the "Gain" menu item, you can adjust the input gain in 3 dB steps.
The radio microphone automatically detects the type of microphone
head being used and changes the adjustment range of the "Gain"
menu item accordingly.
"Low cut" – Setting the low-cut filter
Via the "Low cut" menu item, you can set the low-cut filter.
Settings: "80 Hz", "100 Hz",
"RF mode" - Adjusting the transmission mode
The "RF mode" menu item allows you to adjust the transmission mode.
Settings: "HD", "LR".
"Display" – Selecting a standard display
The "Display" menu item allows you to select one out of 3 standard
displays.
480.000
3:59
3:59
"Frequency" "Preset"
"Lock" – Activating/deactivating the lock mode
Via the "Lock" menu item, you can activate or deactivate the lock mode.
For more information on how to activate or deactivate the lock mode, refer
to page 77.
"Test tone" – Activating the 1 kHz test tone
Via the "Test tone" menu item, you can activate a 1 kHz test tone. This test
tone is transmitted instead of the input signal. You can use this function
for level matching your system or for the walk test.
"Reset" – Resetting the factory default settings
Via the "Reset" menu item, you can reset the radio microphone to its fac-
tory default settings.
"Information" – Displaying the firmware version and frequency
range
Via the "Information" menu item, you can display the firmware version
and the transmitter's frequency range.
"120 Hz".
U
480.000MHz
3:59
"Name"
GUITAR