Using the EM 9046
Channel 1–8 button
and
multiple channel
selection button +
74 |
Digital 9000
"live" operating mode – Using a configured
system
In "live" operating mode, you can select channels for headphone monitor-
ing and synchronize the transmitters and the receiver.
To prepare headphone monitoring:
Connect headphones as described on page 33.
Observe the warnings given there.
To select channels for headphone monitoring:
Select a channel by pressing the channel 1–8 button or press the mul-
tiple channel selection button
taneously.
+
In "live" operating mode, you can also activate channels for synchronization:
Select a channel by pressing the channel 1–8 button.
Proceed as described on page 66.
+
and then select several channels simul-