Muratec MFX-2050 Field Engineering Manual page 86

Printer diagnostic mode ................................................................................ <Setting>, <*>, <2>, <3>
Printer diagnostic test.
Network service mode .................................................................................. <Setting>, <*>, <2>, <4>
Used to display the server sumcheck, export/import the network setting data or to initialize
the network settings.
Set second line .............................................................................................. <Setting>, <*>, <2>, <8>
Used to set memory switches, unique switches, ECM mode, pause length and numbers of
rings for the second telephone line.
Flash ROM Sum check ................................................................................... <Setting>, <*>, <2>, <9>
Used to confirm flash ROM Check Sum after the software is overwritten.
Service Report setting ................................................................................... <Setting>, <*>, <4>, <2>
Used to enter location where to send the service report.
Printer registration adjustment ..................................................................... <Setting>, <*>, <4>, <3>
Used to adjust the printer registration.
Update the software via network .................................................................. <Setting>, <*>, <9>, <0>
Used to upgrade the software via network.
Update the software ....................................................................................... <Setting>, <*>, <9>, <8>
Used to upgrade the software using the USB RomWrite application.
Quick installation mode ................................................................................. <Setting>, <*>, <9>, <9>
You can set the initial setting mode, consumable order sheet setting and service report
setting continuously.
3-2