Muratec MFX-2050 Field Engineering Manual page 154

Memory Switch 071 — Operation
Initial
Switch
Setting
7 0 Factory use only
6 0 Factory use only
5 1 Print TCR with the original
page during memory
transmission when the result
is NG
0: No
1: Yes
4 0 Factory use only
3 1 Print TCR with the original
page during memory
transmission when the result
is OK
0: No
1: Yes
2 0 Factory use only
1 0 Factory use only
0 0 Display modem speed
0: No
1: Yes
Memory switch071 ... Print TCR with the original page
Switch 3
Switch 5
When Memory transmission was OK, ...
When Memory transmission was NG, ...
When all broadcast transmissions were OK, ...
When some broadcast transmissions were NG, ...
Memory Switch 072 — Operation
Initial
Switch
Setting
7 0 Factory use only
6 0 Factory use only
5 0 Factory use only
4 0 Factory use only
3 0 Factory use only
2 0 Factory use only
1 1 Erase polled document
0: No
1: Yes
0 1 Print TCR after the batch
transmission
0: No
1: Yes
Memory Switch 073 ~ 096 — Factory use only
Adjust
For easy identification, the first page of a document
stored for memory transmission will print along a
TCR when the transmission result is NG.
For easy identification, the first page of a document
stored for memory transmission will print along a
TCR when the transmission result is OK.
The transmit/receive speed is displayed in the LCD.
Adjust
Determines if a document stored for polling is
erased after being polled.
Determines if printing the confirmation report after
completing the batch transmission.
3-70
Usage/Comments
0 1
0 1 0
No No Yes
No Yes No
No No Yes
No Yes No
Usage/Comments
1
Yes
Yes
Yes
Yes