Muratec MFX-2050 Field Engineering Manual page 179

Unique Switch 060 — Remote reception
Initial
Switch
Setting
7 0 Factory use only
6 0 Factory use only
5 0 Factory use only
4 0 Factory use only
3 1 Factory use only
2 0 Use numeric keypad on the
fax using second phone
0: No
1: Yes
1 1 Manual transmit/receive
using Start key after off-hook
of second phone
0: No
1: Yes
0 0 Silent detection
0: No
1: Yes
Unique Switch 061 ~ 063 — Factory use only
Unique Switch 064 — Remote reception
Initial
Switch
Setting
7 0 Factory use only
6 0 Factory use only
5 0 Factory use only
4 0 Factory use only
3 0 Load 24V to TEL 2 line
0: No
1: Yes
2 0 Factory use only
1 0 Factory use only
0 0 Set the relay of TEL 2 in
Silent receiving
0: On
1: Off
Unique Switch 065 ~ 066 — Factory use only
Adjust
Determines if using the numeric keypad on the
control panel of the fax using the second phone.
Determines if transmitting or receiving manually
using Start key after off-hook of the second phone.
Note: To enable this function Unique Switch 060: 2
Enables or disables silent detection during Ans/Fax
Ready mode.
Adjust
When set to "1", 24 V will be loaded to TEL 2 in
communication.
Note: Set to "1" in 064 bit 0 when make this feature
When set to "1", TEL 2 does not ring in the silent
receiving.
3-95
Usage/Comments
must also set to "1"
Usage/Comments
available.