Muratec MFX-2050 Field Engineering Manual page 307

PCB INVERTER (MFX-2050/1450)
1) Open the Cover platen.
2) Remove two Cover contact mounting screws, then release three locking tabs, and then remove the
Cover contact.
3) Remove two Cover lens locking snap fits, and four locking tabs, and then remove the Cover lens.
Sna p fit
4) Remove the PCB INVERTER mounting screw, then disconnect two connectors and two locking tabs,
and then the PCB INVERTER.
Cover contact
CN1
CN2
5-17
Cover lens
PCB INVERTER