Muratec MFX-2050 Field Engineering Manual page 185

Unique Switch 085 — Miscellaneous
Initial
Switch
Setting
7 0 Factory use only
6 0 Print/Send the consumable
order sheet when the drum is
near end
0: Yes
1: No
5 0 Print/Send the consumable
order sheet when toner is
near empty
0: Yes
1: No
4 0 Factory use only
3 0 "Next doc" default setting
when scanning with ADF
0: No
1: Yes
2 1 "Next doc" default setting
when scanning with FBS
0: No
1: Yes
1 0 Factory use only
0 0 Multi T.30 monitor journal
0: No
1: Yes
Unique Switch 086 — Factory use only
Unique Switch 087 — Miscellaneous
Initial
Switch
Setting
7 0 Factory use only
6 0 Factory use only
5 0 Factory use only
4 0 Factory use only
3 0 Factory use only
2 0 Print the sending document
on the error massage sheet
0: No
1: Yes
1 0 Factory use only
0 0 Factory use only
Adjust
Note: For this feature to work correctly, you must
register several items. See "3.16 Consumable
order sheet" page 3-126.
Note: For this feature to work correctly, you must
register several items. See "3.16 Consumable
order sheet" page 3-126.
Determine the default setting for "Next doc"
scanning with ADF.
If it is set to "0" the default setting for Next doc is
"No", if is "1" the setting is "Yes".
Determine the default setting for "Next doc"
scanning with FBS.
If it is set to "0" the default setting for Next doc is
"No", if is "1" the setting is "Yes".
If this setting is "Yes", the journal report will be
printed not in the sequence number but in the table
number to see the T.30 monitor.
Adjust
3-101
Usage/Comments
Usage/Comments