Muratec MFX-2050 Field Engineering Manual page 130

Machine Parameter 493
Initial
Switch
Setting
7 0 White balance adjustment
6 0
For Copy modes and
5 0
Black and White 600dpi scan
4 0
mode
3 0
2 1
1 0
0 0
Machine Parameter 494
Initial
Switch
Setting
7 0 Factory use only
6 0 Factory use only
5 0 Black balance adjustment
4 0
For ADF scan
3 0
Copy/Scan/Fax modes
2 0
(For grayscale scan, refer
1 0
machine parameter 495)
0 0
Adjust
This parameter changes the white balance for all
copy modes, and black and white 600dpi scan
mode.
To change the settings for Copy/Scan/Fax mode
respectively, refer to Machine parameters from 460
to 475.
Switch
16 steps
8 steps
4 steps
0 step
-4 step
-8 step
-16step
The total step is the sum of each respective
Machine parameter, 493 and 492 (ADF only).
However the steps cannot exceed –16 or 16.
Adjust
This parameter changes the black balance for ADF
scanning for all modes except grayscale scan.
To change the settings for Copy/Scan/Fax mode
respectively, refer to Machine parameters from 476
to 489.
Switch
63 steps
32 steps
16 steps
8 step
0 step
The total step is the sum of each respective
Machine parameter and 494. However the steps
cannot exceed 63.
3-46
Usage/Comments
76543210
00010000 + Darkest setting
:
00001000
:
00000100
:
00000000  Standard
:
10000100
:
10001000
:
10010000 Lightest setting
Usage/Comments
543210
111111 + Darkest setting
:
100000
:
001000
:
000100
:
000000 Lightest setting