Muratec MFX-2050 Field Engineering Manual page 74

Errors may occur in the following reasons:
Error message
The " " " mark were not entered correctly prior to
the conversion.
The fax number contains a syntax error.
The fax number exceeds 40 digits.
The e-mail address exceeds 50 characters.
The address book cannot store this many num-
bers.
The fax number and e-mail address were not en-
tered.
The address book number contains a syntax error.
The specified address book number exceeds the
limit.
The specified address book number has already
been registered.
The information on an imported vCard(s) exceeds
512 characters.
The CSV/vCard file selected either cannot be
recognized or is empty.
Export details
The following two file types are available as exported address book:
•vCard
• CSV
Detail
The numbers of the double quotation marks were
odd-number. The marks should be even-num-
bered in CSV files.
Only the numeric characters and dialing charac-
ters can be registered in the fax number field.
Available characters: 1 to 9, *, #, -, /, D, F, N, P, S,
T, X
The NGP cannot store more than 300 contacts. If
the OfficeBridge option is installed, the numbers
may differ according to the CF capacity. (1000,
1500 or 2000)
The fax number or the e-mail address is a manda-
tory field the address book's data.
The address book numbers should be specified
between 1 and 300.
It is not possible to register in the same address
book number.
In vCard file, one record should be within 512
characters.
2-21
---
---
---