Muratec MFX-2050 Field Engineering Manual page 319

FRAME SCANNER (MFX-2050/1450)
1) Remove Cover platen. (See page 5-7)
2) Remove the Cover top. (See page 5-13)
3) Remove the Cover lens. (See page 5-17)
4) Disconnect the Flat harness from the connector P1 on the PCB CCD.
5) Release two locking tabs, and then remove the Core.
Flat harness
Core
P2
P1
Frame scanner
PCB CCD
6) Disconnect the Flat harness on the Frame scanner.
7) Remove the belt from the Frame scanner.
Belt
Shaft guide
Belt
Frame scanner
Flat harness
5-29