Muratec MFX-2050 Field Engineering Manual page 182

Unique Switch 072 — Operation
Initial
Switch
Setting
7 0 Factory use only
6 0 Factory use only
5 1 Factory use only
4 0 Factory use only
3 1 Effect charge setting in
department mode
0: No
1: Yes
2 0 Send service report
1: No
2: Yes
1 0 Factory use only
0 0 Factory use only
Unique Switch 073 — Factory use only
Unique Switch 074 — Operation
Initial
Switch
Setting
7 0 Factory use only
6 0 Factory use only
5 0 Factory use only
4 0 Factory use only
3 0 Prohibit double registration
0: No
1: Yes
2 1 Priority of consumable order
sheet printing
0: Print after the current
1: Print immediately
1 0 Print the transmission time
on TCR
0: Print the transmit time
1: Blank
0 1 When receive a fax message
during Auto power off mode,
the LCD will be in standby
mode
0: No
1: Yes
Unique Switch 075 — Factory use only
Adjust
Adjust
printing job is completed
Usage/Comments
When this bit is set to "1", the following available:
 Input the price rate per page for transmission
 Print transmission charge on the department list
Usage/Comments
When set to "0", the same phone number can be
registered in the address book.
When the drum cartridge has reached its design life,
or the toner cartridge is empty, the machine prints a
consumable order sheet.
When this switch is set at "0", the machine will
not print consumable order sheet until the current
printing job is finished.
When set to "0", the transmission time will be
printed on TCR.
3-98