Muratec MFX-2050 Field Engineering Manual page 276

Message on the display
Invalid characters have been entered.
Invalid I.D.code
Invalid number!
Invalid Paper Size
Invalid parameters!
Jam Recover.
Set the document. Press [Start].
From Page :
[Start] [Cancel]
Lamp error. Call for service.
LDAP reference execution error
Link Path is required.
Load XXX paper
Load paper
Load paper for reception
Load paper in the bypass tray
Load paper into the XXX cassette
Macro in use
Mail transmission error
Memory full. Printing will resume
when mem. is free.Press [OnLine] to
stop.
Memory overflow Rx
Memory overflow.
Memory overflow. Number of stored
page: Store these pages?
[Yes] [No]
Name is required
No command stored
No document stored
No Drum Cartridge
Description / Solution
You entered invalid characters. To register a Shortcut, insert the
PC name between "//" and "/". To register a File Name, special
characters such as "\", "/", ":", "*", "?", "<", ">" or "|" cannot be
entered. To register NetBIOS characters other than the alphabet
and numbers between 1 to 9.
The F-code box I.D. code you entered is not valid. Try re-entering
your F-code box I.D. code.
You entered a number which is not valid for the current operation.
The selected paper is not suitable for duplex printing. Select other
paper source. Select plain paper in the regular size.
You entered an invalid value or pressed [Enter] without entering a
value.
– or –
The advanced search failed due to an internal machine error.
Check the LDAP server setting, and try the search again. For more
information about LDAP server set up, refer to the MFP User's
Guide or PC User's Guide.
You selected to continue the job. The machine is instructing you
from which page to set the document. Set the document again from
that page that the machine is indicating you and press <Start>. To
cancel and finish the job, press [Cancel].
The scanner lamp is dim or not operating.
Make repeated copies to help evaporate any internal moisture. If
that doesn't resolve the problem, replace the lamp.
The advanced search failed due to an internal machine error. Try
the search again.
You tried to register a shortcut without entering [Link]. To register a
Folder or FTP server shortcut, you should enter the [Link].
Load the paper specified by the machine.
There is no paper either in the cassette or in the bypass tray. Load
paper.
The paper run out during fax reception. Load paper.
There is no paper either in the cassette or in the bypass tray. Load
paper.
There is no paper in the XXX cassette. Load paper in it.
You cannot press [Macro Program] while you are registering a
Macro.
The transmission failed. Check the printed out "Check Massage" to
identify the error.
There is not enough memory to store the print job. Wait until some
reserved jobs are finished and the memory becomes free.
Memory has overflowed during the fax reception.
Press <Stop> to return the standby screen.
You tried to enter more pages into memory than your machine
could store.
You tried to store more pages into memory than your machine
could store. Press [Yes] to keep the scanned pages in memory,
or press [No] to delete all pages stored during this operation. The
display shows how many pages are stored.
You need to enter a name for the registration.
You pressed <Fax Cancel/Job Confirm.> to review upcoming
commands, but your machine has no command stored.
You tried to print a document from memory, but your machine has
no documents in storage.
The drum cartridge is missing or has not been properly installed in
your machine. Please properly install the drum cartridge.
4-10