Muratec MFX-2050 Field Engineering Manual page 100

Machine Parameter 108
Initial
Switch
Setting
7 0 Printer registration
adjustment (Horizontal) for
6 0
duplex printing cassette.
5 0
4 0
Adjusts the start point to
3 0
print.
2 1
1 1
The plus setting increases
0 1
the left margin and the minus
setting decreases it.
The setting changes by
16 dots (0.6773 mm).
Machine Parameter 109 ~ 139 — Factory use only
Adjust
See table on page 3-21.
Note: Set this switch after setting the margin to
"0 mm" in Unique Switch 52. Then, after setting
this switch, set the margin to the initial setting (4
mm) in Unique Switch 52.
3-16
Usage/Comments