Muratec MFX-2050 Field Engineering Manual page 278

Message on the display
Please install the drum cartridge
correctly.
Please install the toner cartridge
correctly.
Please Remove Paper
Please set up Security Reception
Please Supply Paper
Please wait...
Preparing
Press [Stop] to end the job.
Press the Fax Cancel key to stop
the transmission.
Printer in use
Printer Jam.
Ratio is set to 100%.
Real time transmissions cannot be
archived.
Real time TX in progress. Cannot
print.
Replace the drum
Reset the document
Rx document stored
Scanner Adjusting
Scanner in use
Select Paper Size
Select paper source
Server Initializing
Set document in the ADF
Set individual forwarding numbers
first
Set paper: XXXX
Set the Read/Write Code first.
Description / Solution
The drum cartridge is missing or has not been properly installed
in your machine.
Please properly install the drum cartridge.
The toner cartridge is missing or has not been properly installed
in your machine. Please properly install the toner cartridge.
Paper has jammed in the machine. Follow the instruction on the
display and removed the jammed paper.
The Security Reception is not set up. To use this function set
up Security Reception in advance.
There is no paper either in the cassette or in the bypass tray.
Load paper.
Your machine's printer is either warming up or busy. Please
wait until the machine is finished printing and then re-try your
command or operation.
Your machine's printer is either warming up or busy. Please
wait until the machine is finished printing and then re-try your
command or operation.
Document remains from the operation prior to the interrupt.
Press <Stop> to discharge the document.
Pressed <Stop> during fax transmission. Cancel the
transmission by <Fax Cancel/Job Confirm.>.
The machine cannot execute the job while printing. Wait until
the printing is finished and re-try the operation.
Paper has jammed. Follow the guidance on the display and
remove the paper.
The zoom ratio is set to 100%. To change the zoom ratio, set it
again.
You tried to send a fax using real time transmission or set
memory transmission to [OFF] when the archive function is set
up.
To archive the document, use memory transmission.
The machine cannot print out the job until the current
communication finishes. Please wait.
The drum cartridge has run out. Replace with a new drum
cartridge.
Remove the document from the ADF, and set them again.
To set the security reception to [OFF], first print out the stored
security receipted document.
Your machine's scanner is preparing. Please wait until the
machine is ready.
The machine cannot execute the job until the current job
finishes. Please wait.
The selected paper is not suitable for the document. Select
other paper.
There is no paper that fits the copying document. Select on
which paper to copy or load paper.
The machine's network is now preparing. Please wait until it is
ready.
You tried to make a [2-> 2side] or [2 -> 1side] copy using the
document glass. Those copy are only available from the ADF.
The Fax Forward is not set up. To use this function, set up the
forwarding condition in advance.
There is no paper in the bypass tray. Load the paper indicated
on the display.
You tired to create a "Read Only" protect code prior to "Read/
Write" code. Create a "Read/Write" code first.
4-12