Muratec MFX-2550 User Manual page 84

Item
File Number
Date/Time
Pages
B/W / Color
Preview
Page range
Erase
document(s)
Download
Select MFP
Refresh
Save
Default
Exit
Resolution,
Pixel type,
Fixed image size
[Information] tab
6
Select the document to load, and click [Download].
Note
If you connected the computer and the machine with a USB cable, confirm that the
machine is not in energy save mode such as the low power mode or the sleep mode. If
the machine is in energy save mode, you cannot retrieve data. Press <Energy Save> to
disable the energy save mode.
Displays the file number automatically assigned at the machine.
Displays the date and time that the document was stored in the TWAIN
box.
Displays the number of pages for the stored document.
Displays whether the image was scanned with the monochrome or color
scan format.
Select [Preview] to display the scanned document.
Enables you to set which page to load when a file has multiple pages.
Select [Delete after download] to automatically delete the documents
from the TWAIN box after downloading them.
Starts downloading the stored document.
Used to change the scanner to connect to when the IP address of the
machine has changed, etc.
This is for network scanning only.
Updates the list of files.
Saves the current settings.
This cannot be clicked unless the settings have been changed.
Returns the settings to the factory defaults.
Closes Muratec MFX-25xx NW Scan.
These settings may be required, depending on the application software.
Set them as required.
(Normally it is not necessary to change these settings from their default
values.)
Displays the version information for Muratec MFX-25xx NW Scan.
Scanning Documents Using a TWAIN Box
Description
1
2
2-51