Muratec MFX-2550 User Manual page 261

• Reception Journal
Example Print
9
Number
1 No.
2 Destination
3 Mode
4 Start Time
5 Time
6 Page
7 Result
8 Note
9 Printed date
10 −
*1 When a communication error code is printed, confirm the content of the error and perform the
transmission again. For details, refer to Chapter 4, "Error Messages" in the Administrator's
Guide.
*2 Only printed for a daily communication report.
6-12 Managing the Communication History
3
Item
The job number
The sender's name or fax number
The resolution used for the communication
The time the communication started
The time that elapsed from when the communication started
until when the communication ended
The number of pages transmitted
OK: Completed normally
*: ECM Mode reception
#: Super G3 reception
Code: The communication error code
The type of communication is printed for the following types
of communication: Nothing is printed for other types of
communication.
• Manual Rx
• Polling Rx
• F-code polling Rx
• Received in F-code Secure Box
• Received in F-code Bulletin Box
*2
The date and time that the journal report was printed
The date and time that the journal report was printed, or the
date and time that communication history started to be stored
for a daily communication report
4 5 6 7
Description
10
8
*1